S/N V-1327-001, year 2013 (Mill #5) S/N V-1327-002, year 2013 (Mill #6)
Main Characteristics: Type of weaving machine:Velvet Tronic VTR23-175 The Velvet Tronic weaves face-to-face plain and dobby-designed velvets for upholstery, decoration, dress, automotive fabrics… Total overall reed width max.:175 cm Besides the high production output, the Velvet Tronic is also characterized by: - a good stability, as the heddle frames are driven from the bottom with the Dobbytronic in bottom position. - an easy access, as there are no cross beams at the back or on top of the heddle frames.This means that quick style changes are possible. - a new system of leno devices that is driven from the bottom and that does not need to be removed for changing the heddle frames. - filling tension used for shortening the false edge filling on the left side. - a stable and optimized cutting motion. - servomotor drive and control of pick regulator, pile delivery, ground and pile beam let-off… - an easy use through a powerful PC-based machine control with 12” color touch screen.
Reed Drive: The reed motion has been balanced and allows to weave at high speed with low vibration level, maintaining the quality of the velvet.
With one set of divided rapiers:
The set consists of two insert rapiers and two receiving rapiers.Top and bottom rapier from respectively insert and receiving rapier are identical.
Filling insertion:
Filling scissors:fixed on right side of the reed Receiving rapier opening:positive pending Suction device on filling ends:included Filling tensioners:included
Cutting motion:
Type:Driven by three-dimensional conjugated cams, knife carriage guided on precision finished swallowtail fixed on cutting bank Type of knife holder:Alum + sliding pieces out of synthetic material Type of knives:0,3x44 mm teflon coated Pick regulator:precision servomotor driven Temples:3 top and 3 bottom
Pile delivery:
Type:Servomotor driven Type of pile delivery rolls:top
Rocker bars:
Number of rocker bars:2 in carbon fiber
Take-up motion:
Take-up stand with torque motors of which the torque is electrically adjustable by setting on the terminal (H.M.I.) Max. take-up capacity:800 mm Number of take-up rolls:2 Beamstand position:
Type:VDW For number of backing beams:1 x max. dia. 1000 mm Let-off backing warp beams:servomotor driven For pile warp beam:1 x max. diam. 1250 mm Let-off pile warp beam:motor driven Type of beam holder:customer – VDW – Gusken type
Type of Leno selvedge device:
Type:leno devices driven from the bottom, not to be removed for style changes
Electric equipment:
Voltage:575 V Net frequency:60 Hz Electrical power of main motor:12 kW There are NO beams and NO harness frames
Location
