Description:

1200 TON AP & T BLANKING, EMBOSSING & CUT OFF LINE

Embossing And Cut Off Line
1200 Ton AP&T (Lagan) Blanking,
Model: Lmb-12000-13-09

Press No. 1
Press Type Lmb-12000

Press Force, Stepless Adjustment: 1200 Ton (12000 Kn)
Stroke Length, Stepless Adjustment: 0 - 19.7" (0 - 500 Mm)
Max. Shut Height: 39" (1000 Mm)
Closing Speed: 1"/Sec. - 9.6"/Sec.
Pressing Speed: 0.12"/Sec. - 1.2"/Sec.
Bed Size: 70.8" X 51" (1800 X 1300 Mm)
Frame Opening L-R X F-B: 51" X 35" (1300 X 900 Mm)
Power Supply: 460 V, 60 Hz, 500 A
Approx. Weight: 119,000 Lbs.

Press No. 2

Press Type Mh4-1000-08-08
Press Force: 100 Ton (1000 Kn)
Stroke Length: 7.9" (200 Mm)
Max. Shut Height: 20" (500 Mm)
Bed Size: 42" X 42" (1070 X 1070 Mm)
Frame Opening L-R X F-B: 31" X 31" (800 X 800 Mm)
Approx. Weight: 11,900 Lbs.

Cutoff Shear Type Aks-500-40
Shearing Force: 40 Ton (400 Kn)
Maximum Shearing Width: 20" (500 Mm)
Approx. Weight: 1,400 Lbs.

Pump Unit:
Pump Capacity (Hp1): 95 G/Min (360 L/Min)
Pump Capacity (Hp2): 45 G/Min (170 L/Min)
El Motor (M1): 115 Hp (86 Kw)
Pump Capacity (Hp3): 95 G/Min (360 L/Min)
Pump Capacity (Hp4): 17 G/Min (65 L/Min)
El Motor (M2): 115 Hp (86 Kw)
Pump Capacity (Hp20): 74 G/Min (280 L/Min)
Pump Capacity (Hp30): 8 G/Min (30 L/Min)
El Motor (M3): 10 Hp (7.5 Kw)
Max. Working Pressure: 4,400 Psi (30.5 Mpa)
Capacity Of Hydraulic Oil Reservoir: 581 Gallons (220 Liter)

Voltage: 460 V, 60 Hz.
Electricity Supply: 500 Amp

-Strip Straightener - Type Rma-60-500
Coil Width: 20" (500 Mm)
Maximum Thickness: 0.118" Steel
0.157" Alum
Number Of Feeding-In Rolls: 2
Number Of Straightening Rolls: 9
Roll Diameter: 2.4" (62 Mm)
Driving Force: Electric Motor
Speed Control: Frequency Converter,
0 - 33 Ft/Min (0 - 10 M/Min)
Loop Control: Measuring Wheel

-Servo Roll Feeder - Type Ae 95-500
Maximum Coil Width: 20" (500 Mm)
Number Of Rolls: 2
Roll Diameter: 3.7" (95 Mm)
Driving Force: Electrical Servo
Speed: 0 - 98 Ft/Min (0 - 30 M/Min)
Maximum Thickness: 0.118" Steel
0.157" Alum
Roll Pressure: Pneumatic

-Stacking Equipment Ls:
Model: Auto Arm 604/S
Serial Number: 2893
Year Built: 1995
Horizontal Stroke: 27" (700 Mm)
Vertical Stroke: 1.57" (40 Mm)
Cycle Time: 2.4 Sec.
Material Of Blank: Aluminum Disks
Size Of Wooden Pallet: 24" X 24" (610 X 610 Mm)
Minimum Diameter Of Disk: 9.62" (244.5 Mm)
Maximum Diameter Of Disk: 16" (405.8 Mm)
Maximum Thickness Of Disk: 0.118" (3 Mm)
Maximum Height Of Pack: 20" (500 Mm)
Maximum Temp Of Blank: 40 Deg. C
Installed Power: 7 Kva
Rated Voltage: 460 V
Nr. Phases: 3 Phase
Frequency: 60 Hz.
Rated Current: 9 Amps
Compressed Air Pressure At Entry: 87 Psi (6 Bar)
Air Consumption: N1 / 1' 50