Description:

COMPLETE CORRUGATED PAPER MILL WIDTH 2.600 MM

Used secondhand COMPLETE CORRUGATED PAPER MILL WIDTH 2.600 mm
General information:
- Capacity: ~ 250 Tpd with size press; ~ 300 Tpd without size press
- Grammage: 100 – 200 g/m2
- Net web width after rewinder: 2600 mm
- Speed: 600 m/min
- Designed speed: 800 m/min
- Machine installed in 1967, rebuilt and improved in 1985 and in 2007
- Stopped August 2008

Stock preparation designed for 350 Tpd

• D shape 50 m3 continuous low density pulper, with motor and gear box, with feeding conveyor, power installed 315 kW
• Voith contaminex for coarse rejects, model CMV10 1998 on stainless steel • 3 high density cleaners built by Maule
• Voith turboseparator model ATS 30 – 31, 200 – 260 kW

Approach flow

• Fan pump
• 3 stage low density cleaners
• 0,3 mm slots slotted screen before headbox built by Black Clawson, power installed 90 kW
• Combisorter Voith model CS11, installed in 1996, power 90 kW
• Complete machine
• From headbox to pope winder, so composed:
• Headbox made in stainell steel, built by ST model 285 – 5, with 2 defloculator rolls
• Fourdrinier with all draining elements ceramic covered, built on stainless steel and cantilevered, composed by: 2 foils, 6 vacuumfoils, 12 suction boxes, guildes and tensors, cough roll diameter 750 mm
• Pick-up diameter 500 mm
• First press double felted, top roll Ø 600, bottom roll Ø 610 mm
• Second press Jumbo, both rolls Ø 1506 mm, with 2 new spare rolls press work 335 kN/cml
• Pre-dryer section 36 dryers Ø 1500, working pressure 5 bar, with closed hood and lubrication system
• Inclined size press rolls Ø 1085 mm, built by Toschi
• Post-dryer section 16 dryers Ø 1500, working pressure 10 bar, with closed hood and lubrication system
• Pope winder with automatic spools feeding and change, made new in 2007, built by VAS diameter maximum 3.000 mm
• Rewinder made by VAS new in 2008, 2000 m/min; 5 slitting knives, diameter of rewind 1.800 mm

Ancillary Equipment

• Vacuum system with 4 Nash Elmco vacuum pumps
• Compressed air system
• Steam distribution and condensate recovery
• Hood with heat recovery system, with 2 heat exchanges
• Galleri steam boiler, made in 1973, for 25 tons/h of steam at 48 bar
• Spare boiler Idrotermici, made in 1984, for 25 tons/h at 48bar
• Siemens steam turbogenerator for 2700 KVA, 400 V, 50 Hz; pressure in 45 bar, counter pressure 5 bar

Spare parts for the machine and clothes
Stainless steel pipes and valves
Drive system multimotor completely and new in 2005 by Ansaldo
Central lubrication built by Oilgest