Description:

300,000T-500,000T ANNUAL CAPACITY OF SECOND HAND HIGH SPEED HOT WIRE ROD & REBAR PRODUCTION LINE.

Technical specification
Raw Materials: Billet 130x130mm or 160x160mm.
Finished product:φ5.5 ~ 18mm wire rod, rebar 12-32mm
Comprehensive production capacity: wire rod 300,000t/per year. Rebar 500,000t-600,000t/per year.
Design speed:125m/s, practical speed: 90m/s.
Equipment condition: The whole wire rod line was designed & manufactured in 2013, and ran around 5 years, then standby, all machinery are almost the new ones, repair, update and refurbish all equipment.
Steel Grade: low alloy steel, high carbon steel, plain carbon steel, welding rod steel, etc.
Production features: The whole line shall be 28 stands of rolling mill, including 16 stands roughing mill and intermediate rolling mill, DANIELI type short stress rolling mill, vertical and horizontal arrangement, 2 stands of φ285 type pre-finishing mill, vertical and horizontal arrangement, and 10 stands Morgan type finishing mill, 45°top across arrangement.
Production process:
The qualified billet shall be delivered to reheating furnace through roller table,
heated to 1150℃, then pushed out via steel pusher, and into 8 stands roughing mill (φ550×6+φ 420×2, one motor with one mill) via roller table to carry out rolling work. After cutting with No. 1 flying shear, the steel pieces shall be rolled in 2 stands φ 285 pre-finishing mill (Morgan type, horizontal & vertical structure), then rolled in 10 stands finishing mill to produce the finished product（ 8 〞× 5+6 〞× 5, Morgan type, 45 ° top across arrangement ) while cutting with No.3 flying shear & chopping shear. The final product wire rod will be collected, delivered from PF line, packaged, unloaded, weighted and stored after water cooling system, pinch roll, laying head.
FURTHER DETAILS UPON REQUEST