Line Speed: 45 Meters per Minute (148 FPM) Gear-In 90 Meters per Minute (295 FPM) Through Coil Build-Up
Complete Line With:
Entry Coil Car (Pit Type) Cone Type Uncoiler with Dual Water Cooled Brakes, Sliding Base, Feed Up Drive, Tapered Roller Bearing, Air Clutch, Fife Edge Control Unit Coil Peeler with Powered Hold-Down Roll Edge Guide System
5 Roll Powered Flattener with Entry Pinch Rolls 12" Diameter Entry Pinch Rolls 10" Diameter Work Rolls 80" Roll Face Digital Roll Positioning 45 HP Motor
Crop Shear with Scrap Gate Scrap Box 2 Roll Powered Edge Guide Unit
2 Injector Slitter Heads with Motorized Arbor Adjustments 14" Diameter Arbors 66" Arbor Face 250 HP DC Slitter Drive Rotating Slitter Set-Up Stand Auto Injector Head with Hydraulic Locking
Dual Scrap Winders with Auto Strip Feed System Traversing Strip Clamp with Strand Separator for Feed Up
Drag Pad Tension Stand (New in 2013) Strand Extensioner Model: VKSE 72/3.5-7/5 4HI Capacity: 8mm (.315”) Thick, maximum 7 work Rolls (3 Over 4 Arrangement) 3.5” Diameter Work Rolls 5 Flights Top & Bottom Back Ups 5 Top Flights have Individual Motorized Adjustments Digital Read-Out Work Roll Positioning 2 Sets of Controls Spare Work Rolls and Back-Up Rolls
Exit Crop Shear Passline Deflector Roll Exit Edge Guide System Pivoting Threading Clamp for Strip Feed into Recoiler
Recoiler 24" Full Hydraulic Drum Hydraulic Push-Off Hydraulic Sliding Base 2 x 150 HP DC Motors (300 HP Total) Overarm Separator/ Hold-Down Roll
Exit L Type Coil Car with Coil Holders
Tooling 20mm & 30mm Knives (Some New Knives) 20mm Knives: 6 sets of 30 = 180 Knives 1 New Set of 30 Knives 20 Near New Sets of 60 Knives
30mm Knives: 3 sets of 30 = 90 Knives 2 Near New Sets of 60 Knives
Hydraulic Pumping System
Spare Parts: Separator Arbor Scrap Winder Drive Cone Scrap Winder Idler Cone Backend Cone Assembly Flattener Screw Jack (2 of, Left and Right) Strand Ext Wedges Strand Ext Bearing Blocks Strand Ext Backup Roll Flights 610 Bore Mandrel Palms 760 Bore Mandrel Palms Scrap Arm Ext Cylinder Entry Coil Car Drag Chain Exit Coil Car Arms Scrap Sled Winch Strand Extensioner – 2 New Spare Work Rolls, 9 Flights Including Backup Rolls that have been removed
There is also a container of bearings, sprockets and chains, mandrel wedge pins, clutches, hydraulic motors and various cylinders.
Drawings and Manuals Tooling Knives, Spacers, & Rubbers
Electrical Equipment Upgraded Slitter & Recoiler Motors and Drives in 2010 Reliance Maxitron ABB Digital Drive Compound Converter Reliance PLC 45C15 with Remote I/O
Coil Packaging Line
2100mm (82") X 15,000# Banding Line Four-Arm Exit Turnstile with Coil Push-Off 82" x 15,000# Right Angle Downender 30' Heavy Duty Powered Conveyor Signode Banding Head & Table with 3 Powered Conical Rolls Exit Conveyor
Location
